Panasonic WV-NP244 - Manual (Page 8)

8
Operation Description
Acknowledge alarm occur-
rences (*2)
Turn on/off audio (*3)
Display a still picture (one
shot)
This button will be displayed and will blink when an alarm
occurred. When the button is clicked, the button will disap-
pear. When "Latch" is selected for "Alarm output setup", the
alarm output connector will be reset by clicking this button.
(
☞ page 30)
When this button is clicked, the button will turn into the
button and audio will not be heard.
When this button is clicked, a new window will open and the
still picture (one shot) displayed on the "Live" page will be dis-
played on it.
To save this picture on a PC, right-click on the image and
select "Save" on the displayed pop-up menu.
When this button is clicked, the button will turn into the
button and audio will be heard.
* The [Audio] button will be displayed only when "ON" is
selected for "Mic mode" on the setup menu. (
☞ page 26)