Panasonic KX-TCD545E - Manual (Page 54)

54
SMS Feature (Text Message)
Entering a Number from the Caller ID List
Entering a Number from the Redial List
• “
Sending Message
” is displayed after step 8. The display returns to the standby
mode, then “
Transferring Message
” is displayed on both cordless handset and
base unit display.
• Once you have created a SMS message, the unit will display “
W
Use Last Text?
”
each time you select “
Create
”. If you want to use the text of the last message sent
once again, move the JOYSTICK up to recall the last message.
• If you try to send a message using a phone number (Destination) over 20 digits long
from one of the Handset Phonebook, Caller ID or Redial lists, “
Invalid Number
” is
displayed and the display returns to “
<Enter Phone No>
”.
• The maximum message length is 160 characters. Please consult your SMS service
provider for further details.
• 69 messages can be memorized when you enter 80 characters/1 message.
• If your phone is connected to PBX (Private Branch eXchange: private branch
exchange), see page 63 to enter the destination number.
Follow steps 1 to 5 on the previous page, then:
6 Select the desired item.
twice
Go to step 7.
Follow steps 1 to 5 on the previous page, then:
6 Press RIGHT SOFT
KEY. Select the desired item.
twice
Go to step 7.
Follow steps 1 to 6 on the previous page and above, then:
7 “
Save?
” is displayed, then select
“
Yes
” or “
No
”. (If “
Yes
” is selected,
“
Saved Message
” is displayed.)
8 Select “
Send
”.
545E_E_03.fm Page 54 Monday, September 1, 2003 1:51 PM