Panasonic KX-TCD545E - Manual (Page 63)

Helpline Tel.No. :U.K. 08700 100 076 R.O.I. 01289 8333 63
Teleph
one System
SMS Feature (Text Message)
Setting the PBX Line Access Number
This feature is only for the phones connected to a PBX. This allows you to delete
automatically the PBX line access number (max. 4 digits) when you enter the destination
phone number of an SMS outgoing message from Handset Phonebook, Redial or Caller
ID lists.
To exit the operation, press
at any time.
• The factory preset is no entry of line access number.
Turning the SMS Feature On/Off
To exit the operation, press at any time.
• If you turn the SMS feature on, the unit will begin ringing (one ring) after other
connected telephones.
• The factory preset is “
On
”.
1 Press JOYSTICK
(or move). 2 Select “
SMS
”. 3 Select “
Parameters
”.
4 Enter 4-digit Base
Unit PIN.
(Factory Preset
0000) 5 Select “
PBX Prefix
”. 6 Select “
On
”.
7 Enter Line Access
Number.
(max. 4 digits) 8 Press JOYSTICK. 9 Select “
Save
”, then
“
Saved
” is displayed.
1 Press JOYSTICK
(or move). 2 Select “
SMS
”. 3 Select
“
Parameters
”.
4 Enter 4-digit Base Unit
PIN.
(Factory Preset 0000) 5 Select “
SMS On/Off
”. 6 Select “
On
” or “
Off
”.
When the SMS feature is turned off;
• If you send a message, a tone sounds and the message will return to the SMS incoming
list with “
FD
” attached.
• If you receive from SMS centre call, the message will not be received but SMS centre
phone number will remain in the Caller ID list.
545E_E_03.fm Page 63 Monday, September 1, 2003 1:51 PM