Pentair ScreenLogic BL-C111A - Manual (Page 10)

ScreenLogic Video & Lighting Protocol Adapter User’s and Installation Guide
9. Click the RED X box on the top right side of the dialog to exit the
Configuration setup dialog.
10. Click on the Video & Lighting Protocol adapter in the Local System
box, then click START.
11. Click the
Start ScreenLogic button
to start the ScreenLogic program.
8
Note: Please note it may take
a few minutes for the video
camera to complete its
configuration for the first time
before the video appears.
ScreenLogic Video &
Lighting Protocol
Adapter address
Note: If the Video & Lighting adapter does not show up
under the Local Systems, you can manually type in the
adapter’s IP address in the System Name field. The
adapter’s default IP address is 192.168.2.3