Pentair ScreenLogic BL-C111A - Manual (Page 13)

ScreenLogic Video & Lighting Protocol Adapter User’s and Installation Guide
5. Click the Add New button.
6. Press the light switch five (5) times in the ON position. The green LED
on the light switch will start blinking rapidly which indicates that the
light is ready to be configured. See page 2 for connection diagram.
7. Click the OK button on the message dialog box.
8. Rename the light in the “Name” box. Use a name that describes where
the light is located. Click the OK button. The light setup procedure will
take about one minute for each light fixture.
9. To setup additional lights, click the Add New button and repeat
steps 6 - 9.
11