Panasonic KX-F880 - Manual (Page 54)

54
All messages have been erased.
The message has been erased.
■ Repeating a message
Press to play the current message.
— If you press within 5 seconds of playback, the previous message will be played.
■ Skipping a message
Press to play back the next message.
Note:
● If you hear the voice guide after playing back the
messages, memory is full. Erase some or all of the
messages.
2
1
1
Not enough recording time. Please erase
unnecessary messages.
Example of the voice guide:
Example of the voice guide:
During playback
Erasing incoming messages from memory
Example of the voice guide:
Other remote operations
■ Monitoring the room sound
You can monitor the sound in the room where the unit is installed.
Press during the remote operation.
— You can monitor the room sound for about 30 seconds.
Note:
● After 30 seconds, a beep sounds. To continue monitoring, press again within 10 seconds. 6
6
■ Erasing a specific message from memory
Press when the message you want to erase
is played.
— A long beep and the voice guide will be played.
Then the unit will continue with the next message.
■ Erasing all messages from a specific memory
You can erase all of the recorded messages from the common memory and each mailbox memory.
To erase all of the messages in a mailbox, you must first select the mailbox.
Press when you want to erase the messages
in a specific memory.
— A long beep and the voice guide will be heard.
5
4
Operating the answering device from a remote
phone
(cont.)