Panasonic KX-F880 - Manual (Page 55)

55
Advanced
Operations
■ Recording a marker message
After playing back the recorded messages, you can leave an additional message.
1. Wait for the voice guide indicating the end of the
remote operation.
2. Wait about 10 seconds until the voice guide is
played.
3. Leave a message after the beep.
■ Re-recording a greeting message
You can change the contents of the greeting messages for the ANS/FAX mode and mailbox memories.
To re-record a mailbox greeting message, you must first select the mailbox.
1. Press to start recording during the remote operation.
—A long beep will sound.
2. Speak up to 16 seconds.
—If you pause for over 2 seconds, 6 beeps will sound and the recording will stop. Repeat from step 1
within 10 seconds.
3. When finished, press .
—The new greeting message will be played.
■ Turning the message transfer/pager call on or off
You can remotely turn on or off the message transfer/pager call for incoming messages. You must program
a transfer phone number or a pager number in advance (see page 50).
Press to turn ON the message transfer/pager
call during the remote operation.
Press to turn OFF the message
transfer/pager call.
— If a transfer phone number or a pager number is
not programmed, the voice guide will be played.
You cannot turn this feature on.
■ Skipping the greeting message
You can skip the greeting message.
Press during the greeting message playback.
—The unit will skip the rest of the greeting message.
0
2 8
1 8
9
7
All messages have been played.
Message transfer is set.
Tansfer phone number is 123456789.
or
Pager call is set.
Pager number is 098765432.
Message transfer is off.
or
Pager call is off.
Transfer phone number is not set.
or
Pager number is not set.
Example of the voice guide:
Example of the voice guide:
Please leave your name and message
after the beep.