Precor S3.15 - Manual (Page 26)

S3.15 Assembly and Maintenance Guide
page 26
1 2 3 4 5 6
4
Cable Adjustments
and Maintenance
Cable Adjustments and Maintenance
When the S3.15 is completely assembled, you need to
check the cables for proper tension. Obvious signs that
cable problems exist include:
✔ Top Cap Weight does not rest squarely on the top
weight of the Weight Stack.
✔ Cable rubs the inside edges of the pulleys.
✔ Excess slack exists in the cable.
✔ Weight Pin cannot be easily inserted in or
removed from each hole in the Weight Stack.
CAUTION: Take the time to perform the following
steps. If the cables do not have the proper tension
you could void the Precor Limited Warranty.