Polycom SpectraLink 8000 - Manual (Page 21)

Configuring the SpectraLink 8000 SVP Server
PN: 1725-36032-001_G.doc 21
Network Configuration
The IP address and other network settings are established via the
Network Configuration screen. This is also where you may optionally
establish a hostname and enter the IP address of the location of any
software updates you may obtain from Polycom. See Chapter 5
Software Maintenance for more information about installing software
updates via TFTP.
Scroll to
Network Configuration and select by pressing Enter. A screen
similar to the following appears:
Note the navigation options at the bottom of the screen. Press Enter to
change a value, ESC to exit the screen, and the arrow keys to move
the cursor.