Planet Technology VIP-152T - Manual (Page 18)

PLANET VIP-152T User’s Manual
15
Chapter 3
Configuring the VIP-152T through Web Pages
The VIP-152T web management interface provides user an easier way to configure rather than command line
method through TELNET.
The configuration function and steps are similar with the way through command line. Please refer to the
chapter 4-Configuring the VIP-152T through Telnet command lines for more detail information. Below is a
guide for user to configure via web interface.
Step 1. Browse the IP Address predefined via Keypad
Please enter IP address (user have to set via LCD menu first) of VIP-152T in web browser. the default IP
address of VIP-152T is 192.168.0.1, user can connect to VIP-152T with this default IP via standard web
browser.
Step 2. Input the login name and password
„ Login name: root or administrator
User who requests authorization to execute all configuration commands needs to login with
“root”. If a user login with “administrator”, commands below are not functional:
1. Password: set password of login: “root” users.
2. Flash clean: clean all current configurations
3. Rom configuration: upgrade boot sector
4. Rom configuration: upgrade whole 2m software file
„ Password (The same with TELNET): Null (no need to key in password in default value)