Planet Technology VIP-152T - Manual (Page 20)

PLANET VIP-152T User’s Manual
17
"
Note:
After change any settings, please remember to reboot (in Reboot System) VIP-152T so that
changes can take effect.
1. Network Interface
- IP Address: Set IP Address of VIP-152T
- Subnet Mask: Set the Subnet Mask of VIP-152T
- Default routing gateway: Set Default routing gateway of VIP-152T
- Get IP Mode: User has to set VIP-152T to use which network mode.
1. Fixed IP: User has to assign a fixed IP to VIP-152T.
2. DHCP: When DHCP function enables, VIP-152T will automatically search DHCP server after
reboot.
3. PPPoE: If VIP-152T is working with PPPoE connection, user have to set related parameters in
“PPPoE Configure “page.
"
Note:
If User set “Get IP mode” as DHCP or PPPoE, IP address, Subnet Mask, and Default routing
gateway will become 0.0.0.0 and not allow to be configured.
- SNTP: Enable / Disable the Simple Network Time Protocol function
- SNTP Server Address: Set SNTP Server Address
When SNTP server is available, enable VIP-152T SNTP function to point to SNTP server IP
address so that VIP-152T can get correct current time.