Planet Technology VIP-152T - Manual (Page 41)

PLANET VIP-152T User’s Manual
38
volume”, voice –volume input “value of volume”, voice –volume dfmt “value of volume”)
"
Note:
If value of volume set as 0 means –32db, 1 means –31db…etc.
5. -nscng: enable or disable sound compression and comfort noise generation. It is only for codec
G.723.1. (0 for off, 1 for on)
6. -echo: enable or disable echo cancellation function .
7. -mindelay: set minimum delay of jitter buffer(0~150)
8. -maxdealy: set maximum delay of jitter buffer(0~150)
"
Note:
It is for advanced administrator use only. Please ask your distributor before
changing any settings of this command.
usr/config$ voice
Voice codec setting information and configuration
Usage:
voice [-send [G729 ms] [G723 ms] [G711U ms] [G711A ms] ]
[-volume line [voice level] [ring level] [input level] [dtmf level]]
[-nscng [G711U used1] [G711A used2] [G723 used3]]
voice -print
voice -priority [G729] [G723] [G711U] [G711A]
-print Display voice codec information and configuration.
-send Specify sending packet size.
G.729 (20/40/60 ms)
G.723 (30/60/90 ms)
G.711U (20/40/60 ms)
G.711A (20/40/60 ms)
-priority Priority preference of installed codecs.
G.729
G.723
G.711U
G.711A
-volume Specify the following levels:
voice volume (0~9, default: 7),
ring volume (0~9, default: 7),
-nscng No sound compression and CNG. (G.723.1 only, On=1, Off=0).
Example:
voice -send g729 60 g723 60 g711u 60 g711a 60
voice -volume voice 7 ring 7
1
usr/config$