Panasonic TY-FB10WPE - Manual (Page 32)

32
Various display methods
(cont.)
Multiple Source Multi Live Mode
Connect up to four computers to each of up to eight units, and display in each unit by the 4-screen multi style.
Click [ ] of the launcher.
The “Select Access Port” window appears.
2
Press the [INDEX] button on the remote control to turn the
display screen into a full screen display (the status when
no index window is displayed).
If you press the [INDEX] button once or twice when index windows are displayed on
the display screen, the screen will switch over to a full screen display.
1
Select the desired units, and click [OK].
Selected units are displayed in pink.
If click again, selected items are canceled.
If click [OK], the connection with the units is established.
5
Select the network number of the desired units from [Network].
Units powered on in the chosen network group are listed.
4
Click [ ] of [Access Device].
3
Check the status indication on the launcher to make sure that transmission is
possible (check that the green lamp is lit). 6
Click [ ] on the launcher.
The window shown to the right appears.
7