Panasonic DMP-BD605 - Manual (Page 13)

RQT9378
13
AC power connection
G Connecting to 5.1ch AUDIO OUT terminal [BD80]
≥“Analog Audio Output” should be set to “2ch
(Downmix) + 5.1ch”. (> 34)
≥Enjoying High Bit rate Audio of BD-Video
(> 8)
≥Using this connection, 7.1 channel surround
is mixed down to 5.1 channel audio.
≥When connecting amplifier/receiver or other
devices with HDMI AV OUT terminal, set
“HDMI Audio Output” to “Off”. (> 34)
(Otherwise, depending on the specifications
of connected devices, the audio from AUDIO
OUT terminal may be output as two channels
only.)
≥When connecting a TV (> 11, A) with HDMI
AV OUT terminal, set “HDMI Audio Output” to
“Off”. (> 34)
(Otherwise, the sound may not be output with
the desired audio.)
≥Depending on how the disc was recorded, the
audio may not be output properly on the
number of channels desired.
Cable connections
a Front speaker (L/R)
b Surround speaker (L/R)
c Center speaker
d Subwoofer
H Connecting to 2ch AUDIO OUT terminal ≥“Analog Audio Output” should be set to “2ch
(Downmix) + 5.1ch”. (> 34)
≥Using the two analog audio channels this
connection provides, you will not be able to
use any surround sound audio modes.




Connect Audio
cables to
terminals
corresponding to
the speakers you
have connected.
Back of the unit
Amplifier/receiver
Multi channel speakers
AUDIO IN
R L VIDEO IN
2ch AUDIO OUT
Television
Audio/Video cable (included)
Back of the unit
Amplifier/receiver
AUDIO IN
OR
≥For best results this unit should be connected
directly to an AC outlet.
≥This unit consumes a small amount of AC
power (“Quick Start”: “Off”, less than 0.5 W)
even when turned off. In the interest of power
conservation, if you will not be using this unit
for an extended period of time, it can be
disconnected.
Back of the unit
AC power supply cord (included)
To a household AC outlet
(AC 120 V, 60 Hz)
Cooling fan
G
e
tti
n
g
star
te
d
RQT9378~Body_mst.fm 13 ページ ２００９年１月５日 月曜日 午後６時４９分