Panasonic DMP-BD605 - Manual (Page 9)

RQT9378
9
Regarding 24p output
[BD-V]
Many BD-Video movie contents are recorded in 24 frames/second in accordance with the film materials. However, they will normally be output in
60 frames/second in accordance with the display format.
These can be output in 24p as the original. Therefore, high-quality video can be enjoyed, such as the improved clarity, enhanced perspective, etc.
NECESSARY CONNECTIONS
≥Connect to a TV supporting 1080/24p input via an HDMI cable.
NECESSARY SETTINGS
≥“24p Output”: “On” (> 34)
Necessary settings for audio output
After connecting to the terminals, perform necessary settings.
≥For more information about settings, refer to page 33, 34, 37.
≥When using the different terminal at the same time, the sound may not be output with the desired audio if the setting is incorrect.
In the following case, set “HDMI Audio Output” to “Off”. (> 34)
– [BD80]: When connecting a compatible amplifier/receiver using 7.1ch AUDIO OUT/5.1ch AUDIO OUT terminals, and connecting a compatible
television using HDMI AV OUT terminal
– [BD80]: When connecting a compatible amplifier/receiver using both 7.1ch AUDIO OUT/5.1ch AUDIO OUT terminals and HDMI AV OUT
terminal if outputting the audio from analog terminals
– When connecting a compatible amplifier/receiver using DIGITAL AUDIO OUT terminals, and connecting a compatible television using HDMI AV
OUT terminal
To return to the previous screen
Press [RETURN].
To exit the screen
Press [SETUP].
“BD-Video
Secondary Audio”
“Dolby D/Dolby D +/
Dolby TrueHD”
“DTS/DTS-HD”
1) While stopped
Press [SETUP].
2) Press [3, 4] to select “Audio” and press [OK].
3) Press [3, 4] to select “Digital Audio Output” and press [OK].
4) Press [3, 4] to select “Dolby D/Dolby D +/Dolby TrueHD”, “DTS/DTS-HD”,
or “BD-Video Secondary Audio” and press [2, 1] to select the option.
“Analog Audio
Output” [BD80]
1) While stopped
Press [SETUP].
2) Press [3, 4] to select “TV / Device Connection” and press [OK].
3) Press [3, 4] to select “Analog Audio Output” and press [OK].
4) Press [3, 4] to select the option and press [OK].
5) Press [OK].
≥The channel setting screen is displayed. (> 37)
RETURN
Audio
Dynamic Ran g e Compression
Di g ital Audio Output
PCM Down Conversion
Downmix
OK
Off
Off
Stereo
Hi g h Clarity Sound Disable
RETURN
Connection
TV Aspect
HDMI Connection
Component Video Resolution
Analo g Audio Output
OK
16:9
480i
2ch + 5.1ch
G
e
tti
n
g
star
te
d
DMP-BD80_60PP-RQT9378_ENG.book 9 ページ ２００８年１２月２２日 月曜日 午後８時２７分