Panasonic DMP-BD605 - Manual (Page 35)

RQT9378
35
To select these options, perform steps 1–4 (> 32)
(Continued on the next page)
“Network”
IP Address/DNS Settings (> 17)
≥Press [OK] to show the following settings.
Connection Test — — — —
IP Address Auto Configuration (DHCP) ≥On ≥Off
IP Address — — —. — — —. — — —. — — —
Subnet Mask — — —. — — —. — — —. — — —
Default Gateway — — —. — — —. — — —. — — —
DNS Auto Configuration (DHCP) ≥On ≥Off
Primary DNS — — —. — — —. — — —. — — —
Secondary DNS — — —. — — —. — — —. — — —
Auto Detect Connection Speed ≥On ≥Off
Connection Speed Setting
This is enabled only when “Auto Detect Connection Speed” is
turned “Off”.
≥10BASE Half Duplex ≥10BASE Full Duplex
≥100BASE Half Duplex ≥100BASE Full Duplex
Proxy Server Settings (> 18)
≥Press [OK] to show the following settings.
Reset to factory preset ≥Yes ≥No
Proxy Address (The initial setting is blank.)
Proxy Port Number (The initial setting is “0”.)
Connection Test — — — —
Network Service (> 27) (VIERA CAST)
≥Press [OK] to show the following settings.
Network Lock
You can restrict using VIERA CAST.
≥Follow the on-screen instructions. Enter a 4-digit password with
the numbered buttons when the password screen is shown. It
will be the common password for “DVD-Video Ratings”,
“BD-Video Ratings” and “Network Lock“.
≥Do not forget your password.
≥On ≥Off
Changing settings (When “On” is selected)
≥Change Password
Audio Auto Gain Control
Volume that is different depending on the contents is adjusted
automatically to the standard volume while using the VIERA
CAST.
≥Depending on contents, this function effect will not work.
≥Select “Off” when the audio is warped.
≥On ≥Off
Reduce to Screen Size
The screen is displayed reduced so the displayed screen of the
content does not get truncated.
≥On ≥Off
Time Zone
By selecting the time zone, it is possible to set the unit’s time to
match your location.
≥Some VIERA CAST contents require the time zone to be set.
Set the time zone if necessary.
≥GMT s12 to r12
(The initial setting is “s5”.)
GMT s5 l EST (Eastern Standard Time), GMT s6 l CST (Central Standard Time)
GMT s7 l MST (Mountain Standard Time), GMT s8 l PST (Pacific Standard Time)
GMT s9 l AKST (Alaska Standard Time), GMT s10 l HST (Hawaii Standard Time)
DST
Select “On” when using Daylight Saving time.
≥On ≥Off
MAC Address (> 17)
Displays the “MAC Address” of this unit.
“Others”
Off Timer
Select how long the unit remains on when it is not being used.
≥2 Hours ≥6 Hours ≥Off
Remote Control Code (> 36) ≥Set Code 1 ≥Set Code 2 ≥Set Code 3
Quick Start
Speed of startup from power off is increased.
≥When the setting of “Stand-by power save” is enabled on
the TV that supports HDAVI Control 4, it will take longer to
startup this unit when the power supply of the TV is on
standby mode even if the “Quick Start” is set to “On”.
≥On:
≥Off:
Internal control unit will be powered when it is set to "On”, so contents of the
following will be different from the time it is set to “Off”.
≥Idle power consumption will increase. (about the power consumption > 45)
≥The cooling fan may turn slowly to prevent overheating of internal parts.
Easy Setting
You can execute basic settings (“On-screen Language”, “TV
Aspect”, “Analog Audio Output” [BD80],
“Quick Start”).
≥Yes ≥No
S
e
tti
n
g
s
RQT9378~Body_mst.fm 35 ページ ２００９年２月２０日 金曜日 午後４時２３分