Panasonic KX-FLB811 - Manual (Page 17)

1. Introduction and Installation
15 For assistance, please visit http://www.panasonic.com/consumersupport
Caution:
L To prevent injuries, be careful not to
put your hands under the top cover.
Toner save feature
If you want to reduce toner consumption, set the
toner save setting to ON (feature #482 on page
60). The toner cartridge will last approximately
40 % longer. This feature may lower the print
quality.
1.6 Document tray
Insert the document tray ( 1) into the slot (2) on
the unit.
1.7 Output tray
KX-FLB811 has 2 pieces of output tray and KX-
FLB801 has 1 output tray pre-installed.
Note:
L Do not place the unit in an area where the
output tray may be easily bumped into.
1.7.1 For KX-FLB811 users
As a default setting, printed paper is stacked on
the output tray as follows.
–
Upper output tray (“ #1”): Printed document
by using the computer and copied document.
– Lower output tray (“ #2”): Received fax
document.
L You can change the output tray setting for
faxing (feature #441 on page 63) and for
copying (feature #466 on page 65).
To change the output tray from the computer,
set the printer properties. See page 51, 56 for
details.
1 Insert the output tray (
1) into the slots (2),
then push the tray down until it latches into
place.
2
1
1
2
FLB811-PFQX2307ZB-en.book Page 15 Thursday, February 16, 2006 3:57 PM