Help 68 – Panasonic KX-FLB811 User Manual

Page 70

Advertising
background image

9. Help

68

For assistance, please visit http://www.panasonic.com/consumersupport

“

MODEM ERROR”

L

There is something wrong with the unit’s modem. Contact our
service personnel.

“

NO FAX REPLY”

L

The other party’s fax machine is busy or has run out of recording
paper. Try again.

“

OUT OF PAPER

INPUT TRAY #1”

L

Recording paper is not installed or the input tray has run out of
paper. Install paper (page 18, 19).

L

Recording paper is not fed into the unit properly. Reinstall paper
(page 18, 19).

L

The paper input tray is not installed or is not inserted completely.
Insert the paper input tray into the unit.

Note:

L

“

#1”: Paper input tray

L

“

#2”: Manual input tray

“

PAPER JAMMED”

“

OPEN TOP COVER”

L

A recording paper jam occurred. Clear the jammed paper (page
79)
.

“

PC FAIL OR BUSY”

L

The cable or the computer power cord is not connected correctly.
Check the connections (page 48).

L

The software is not running on the computer. Restart the software
and try again.

“

PLEASE WAIT”

L

The unit is warming up. Wait for a while.

“

REDIAL TIME OUT”

L

The other party’s fax machine is busy or has run out of recording
paper. Try again.

“

REMOVE DOCUMENT”

L

The document is jammed. Remove the jammed document (page
83)
.

L

Attempted to send or copy a document longer than 600 mm
(23

5

/

8

") using the auto document feeder. Press {STOP} to remove

the document. Divide the document into two or more sheets and try
again.

“

REMOVE PAPER IN

INPUT TRAY #2”

L

The recording paper is installed in the manual input tray when
trying to copy, receive faxes or print reports. Remove the recording
paper from manual input tray.

“

REPLACE DRUM”

“

CHANGE SUPPLIES”

L

The drum life is complete. Replace the drum unit immediately
(page 76).

“

RX MEMORY FULL”

L

The memory is full of received documents due to a lack of
recording paper or a recording paper jam. Install paper (page 18)
or clear the jammed paper (page 79).

L

If feature #442 is set to “

ALWAYS” (page 64), check the connection

between the computer and the unit.

“

TONER EMPTY”

“

CHANGE SUPPLIES”

L

The toner life is complete. Replace the toner cartridge immediately
(page 76).

“

TONER LOW”

“

CHANGE SUPPLIES”

L

The toner life is near to an end. Replace the toner cartridge as
soon as possible (page 76).

“

TOP COVER OPEN”

L

The top cover is open. Close it.

“

TRANSMIT ERROR”

L

A transmission error occurred. Try again.

“

WARMING UP”

L

The inside of the unit is cold. Let the unit warm up. Wait for a while.

Display

Cause & Solution

FLB811-PFQX2307ZB-en.book Page 68 Thursday, February 16, 2006 3:57 PM

Advertising