Panasonic KX-FLB811 - Manual (Page 61)

8. Programmable Features
59
8.2 Basic features
Feature/Code Selection
Setting the quick setup
{#}{
1}{0}{0}
You can print out the quick fax setup guide and select the desired
receiving mode depending on your situation.
{
1} “ FAX ONLY” (default): Use only as a fax (page 36).
{ 2} “ DIST. RING”: With the Distinctive Ring service (page 42).
{ 3} “ EXT. TAM”: With an external telephone answering machine
(page 37).
{
4} “ TEL ONLY”: Mostly phone calls (page 36).
1. Press {MENU}.
2. Press {#}, then {1}{0}{0}.
3. Press {SET}.
4. Press {SET} again to print the quick fax setup guide.
L If you do not wish to print it, press {STOP}.
5. Press {1} to {4} to display the desired setting.
6. Press {SET}.
7. Press {MENU}.
Setting the date and time
{#}{
1}{0}{1}
Enter the date and time using the dial keypad. See page 24 for details.
Setting your logo
{#}{
1}{0}{2}
Enter your logo using the dial keypad. See page 25 for details.
Setting your fax number
{#}{
1}{0}{3}
Enter your fax number using the dial keypad. See page 27 for details.
Setting the dialing mode
{#}{
1}{2}{0}
{ 1} “ PULSE”
{ 2} “ TONE” (default)
See page 22 for details.
Setting flash time
{#}{
1}{2}{1}
The flash time depends on your telephone exchange or host PBX.
{
1} “ 700ms” (default)
{ 2} “ 600ms”
{ 3} “ 400ms”
{ 4} “ 300ms”
{ 5} “ 250ms”
{ 6} “ 110ms”
{ 7} “ 100ms”
{ 8} “ 90ms”
Note:
L If the unit is connected via a PBX, PBX functions (transferring a
call, etc.) might not work correctly. Consult your PBX supplier for
the correct setting.
Changing the LCD display
contrast
{#}{
1}{4}{5}
{ 1} “ NORMAL” (default): For normal contrast.
{ 2} “ DARKER”: Used when the display contrast is too light.
Setting the ringer pattern
{#}{
1}{6}{1}
{ 1} “ A” (default)
{ 2} “ B”
{ 3} “ C”
FLB811-PFQX2307ZB-en.book Page 59 Thursday, February 16, 2006 3:57 PM