Panasonic KX-FLB811 - Manual (Page 64)

8. Programmable Features
62
Sending a fax at a specific
time
{#}{
4}{1}{2}
This feature allows you to take advantage of low-cost calling hours
offered by your telephone company. This feature can be set up to 24
hours in advance of the desired time.
{
0} “ OFF” (default)
{ 1} “ ON”
To send a document:
1. If the {FAX} light is OFF, turn it ON by pressing {FAX}.
2. Insert the document into the auto document feeder.
3. If necessary, change to the desired resolution (page 28) and the
desired contrast (page 28).
4. Press {MENU}.
5. Press {#}, then {4}{1}{2}.
6. Press {1} to select “ ON”.
7. Press {SET}.
8. Enter the fax number.
L To enter an item using one-touch dial feature and navigator
directory, see step 4 on page 33. (When using navigator
directory, you do not have to press {DIRECTORY} before
pressing {V} or {^}.)
9. Press {SET}.
10. Enter the transmission start time.
L Press {*} repeatedly to select “ AM” or “PM”.
11. Press {SET}.
L The document will be fed into the unit and scanned into
memory. The unit will then send the data at the specified time.
Note:
L To cancel after programming, press {STOP} then {SET}.
L You can also send a document using the scanner glass. Press
{
SET} in step 11, then press {START}.
Setting the Error
Correction Mode (ECM)
{#}{
4}{1}{3}
This feature is available when the sending / receiving fax machines are
ECM compatible.
{
0} “ OFF”: Deactivates this feature.
{ 1} “ ON” (default): If there is an error during fax transmission /
reception, the unit will support the communication.
Setting the connecting
tone
{#}{
4}{1}{6}
If you often have trouble when sending faxes, this feature allows you to
hear connecting tones: fax tone, ring back tone and busy tone. You
can use these tones to confirm the status of the other party’s machine.
{
0} “ OFF”: Deactivates this feature.
{ 1} “ ON” (default): You will hear connecting tones.
Note:
L If the ring back tone continues, the other party’s machine may not
be a fax machine or may have run out of paper. Check with the
other party.
L The connecting tone volume cannot be adjusted.
Activating the Distinctive
Ring feature
{#}{
4}{3}{0}
{ 0} “ OFF” (default)
{ 1} “ ON”
See page 42 for details.
Feature/Code Selection
FLB811-PFQX2307ZB-en.book Page 62 Thursday, February 16, 2006 3:57 PM