Timer – Panasonic TZ-DRD100 User Manual
Page 63
62
R
OLLER
G
UIDE
M
ENU
O
PERATIONS
TIMER
This Digital Satellite Receiver contains eight timers that are capable of tuning the Digital
Satellite Receiver on and off at selected times, on selected channels and on selected
days. The timer options provide you an automatic way of controlling the Digital Satellite
Receiver when it is active. The options are the following:
•
OFF (default state)
•
ON
Off state
The Off state disables the timer and clears the timer data fields.
On state
The On state enables the timer to perform several actions once a timer is active. The
Digital Satellite Receiver is turned ON and it is tuned to the specified channel. Once the
event has ended the Digital Satellite Receiver is turned OFF.
By leaving a timer in a ON mode, the Digital Satellite Receiver will tune to that channel
every week at that specified time and day. To turn off the timer, toggle the ON mode to
OFF.
Procedure
r
Press MENU button to display the Rollerguide menu.
r
Press
pq
buttons to highlight TIMER icon.
r
Press ACTION button to display the TIMER menu.
r
Press
pq
buttons to select the desired Timer.
r
Press
u
button to change TIMER settings.
r
Press
u
button to enter the mode field.
r
Use
pq
buttons to select the Mode OFF or ON.
r
Press ACTION button to save your selection.
r
Press
q
button to select Start (current day and time are shown).
r
Use
u
and
pq
to select day, press
u
and
pq
to select hour and press
u
and
pq
to
select minutes.
r
Press
t
to highlight Start and press
q
to select Stop and repeat procedure to set day,
hours and minutes.
r
Press
q
button to highlight Channel. Use numeric keys on the remote control to enter
channel number. Press ACTION to enter your channel selection.
r
Press
q
button to highlight Repeat.
r
Press
u
button to highlight weekly or once.
r
Use
pq
buttons to select the choices.
r
Press
t
button 3 times to exit the menu.
Timer 1
Timer 2
Timer 3
Timer 4
Timer 5
Timer 6
Timer 7
Timer 8
Mode
Start
Stop
Repeat
Channel
Off
u
Once
u
0-0
Channel Not Available
--
--- --:-- --
--- --:-- --
Press
u
to change Timer 1 settings.