Panasonic RC-CD350 - Manual

1
Model No.
RC-CD350
Operating instructions
CD Clock Radio
PRESET TUNING -PRESET SOUND EQ -S.VIRTUALIZER SLEEP CLOCK/ALARM ALARM .CHECK-ON/OFF
DOZE
TUNER/BAND -AUTO PRESET
ADJUST PLAY MODE 2 1 3
DISPLAY -DIMMER
Dear customer
Thank you for purchasing this product.
Before connecting, operating or adjusting this product, please read these
instructions completely. Please keep this manual for future reference.
Note
“EB” on the packaging indicates the United Kingdom.
Matsushita Electric Industrial Co., Ltd.
Web Site: http://www.panasonic.co.jp/global/
RQT7608-B
H0204ZZ0
EB GN En
Supplied accessories
1 loop antenna: RSA0031
Use the numbers indicated when asking for replacement parts.
www. panasonic.co.uk (for UK customers only)
• Order accessory and consumable items for your product with ease and
confidence by telephoning our Customer Care Centre Mon-Friday 9:00am-
5:30pm. (Excluding public holidays.)
• Or go on line through our Internet Accessory ordering application.
• Most major credit and debit cards accepted.
• All enquiries transactions and distribution facilities are provided directly by
Panasonic UK Ltd.
• It couldn’t be simpler!
Customer Care Centre
For UK customers: 08705 357357
For Republic of Ireland customers: 01 289 8333
Technical Support
For UK customers: 0870 1 505610
This Technical Support Hot Line number is for Panasonic PC software
related products only.
For Republic of Ireland, please use the Customer Care Centre number listed
above for all enquiries.
For all other product related enquiries, please use the Customer Care
Centre numbers listed above.
Troubleshooting guide
Before requesting service, make the below checks. If you are in doubt about some of
the check points, or if the remedies indicated in the chart do not solve the problem,
consult your dealer for instructions.
The clock shows “-:--”. • Set the clock.
There is a lot of
noise. • Keep away from mobile phones, televisions, and other
tuners.
• Extend and change the direction of the antenna.
The alarm doesn’t
sound at the set time. • Ensure the alarm’s indicator is on (“ALARM 1”, “ALARM
2”, or “ALARM 3”).
The memory has
been cleared. • Reset the items into the memory.
• Insert a battery to preserve the memory contents.
“no dISC” appears. • You haven’t inserted a CD.
Play doesn’t start or
display is incorrect. • Clean the CD.
• Clean the lens with a blower (SZZP1038C
recommended). If the lens gets marked with
fingerprints, gently wipe them off with a cotton swab.
• Wait an hour for condensation to dry, then try again.
• Make sure the label is facing out.
• Replace the CD if it is scratched, warped, or irregularly
shaped.
The CD or radio
display disappears. • These displays disappear after a few seconds. To show
them again, press [DISPLAY, –DIMMER].
For the United Kingdom and Republic of Ireland