Panasonic AG-HPX170 - Manual (Page 11)

Men
u
10
Item
Display
mode
Description of settings
FOCUS ASSIST (Camera) Allocates a function to the FOCUS ASSIST button.
EXPANDED:
Magnifies the center portion of the image.
GRAPH:
Displays a frequency distribution graph at the top right in the viewfinder
and LCD monitor.
BOTH:
Magnifies the center portion of the image and displays a histogram.
MF ASSIST (Camera) Automatically sets the last focus during manual focusing.
ON:
Automatically sets the last focus.
The focus may not be set correctly if the last focus differs
considerably from the manually set focus.
You cannot operate using the remote control connected to the CAM
REMOTE jack.
OFF:
The focus is not adjusted automatically.
•
•
WFM (Camera) Switches the waveform display that appears when the WFM button is
pressed.
WAVE:
Displays a waveform.
VECTOR:
Opens a vector display.
WAVE/VECT:
Each press of the button, switches the settings in the following order:
OFF " WAVE (waveform) " VECTOR (vector) " OFF.
LCD (Camera) Allocates a function to the LCD button.
LCD REV:
Flips the LCD image vertically and horizontally.
OVERSCAN:
Switches between overscan and underscan of the LCD/viewfinder
image.
This button toggles between the overscan and underscan image at
each press.
LCD BL:
Switches the brightness of the LCD backlight.
The brightness of the backlight set using LCD BL is retained when
functions assigned using the LCD button change.
•
AUTO SW screen
Item
Display
mode
Description of settings
A.IRIS (Camera) ON:
Performs the auto iris control in auto mode. The IRIS button is
deactivated.
OFF:
Deactivates the auto iris control in auto mode. This performs the iris
control selected with the IRIS button.
SW MODE screen (continued)
___indicates the factory setting.