Panasonic AG-HPX170 - Manual (Page 12)

10
Item
Display
mode
Description of settings
AGC (Camera) Sets the Auto Gain Control when the ON is selected in A.IRIS.
dB:
Performs the Auto Gain Control (max. 6 dB) in auto mode.
1dB:
Performs the Auto Gain Control (max. 12 dB) in auto mode.
OFF:
Does not perform the Auto Gain Control in auto mode. Initiates the
control of the gain selected by the GAIN switch.
ATW (Camera) ON:
Performs the ATW (Auto Tracing White Balance) function in auto
mode. You cannot select ON/OFF of the ATW function with the WHITE
BAL switch or the USER button when this is selected. However, if
ATWLOCK is assigned to the USER button, you can set the white
balance value with the USER button.
OFF:
Does not perform the white balance function in auto mode. This
performs the white balance function selected with the WHITE BAL
switch.
AF (Camera) ON:
Performs auto focusing in auto mode. You cannot use the FOCUS
switch and PUSH AUTO button when this is selected.
OFF:
Does not perform auto focusing in auto mode.This performs the
focusing selected with the FOCUS switch or PUSH AUTO button.
RECORDING SETUP screen
Item
Display
mode
Description of settings
REC FORMAT (Camera) Selects the recording format.
1080i/60i, 1080i/30P, 1080i/24P, 1080i/24PA, 720P/60P, 720P/30P,
720P/24P, 720P/30PN, 720P/24PN, 480i/60i, 480i/30P, 480i/24P,
480i/24PA
MCR FORMAT (MCR) Selects playback or a 1394 input format.
1080i/60i, 720P/60P, 720P/30PN, 720P/24PN, 480i/60i
80i REC MODE (Camera) Select the recording mode for a 480i recording format.
DVCPRO0, DVCPRO, DV
80i MCR MODE (MCR) Selects format for playback or 1394 input in the 480i recording format.
DVCPRO0, DVCPRO, DV
REC FUNCTION (Camera) Selects the special recording mode. (Pages 46 - 48)
NORMAL, INTERVAL, ONE SHOT, LOOP
ONE-SHOT TIME (Camera) Selects the one-shot recording time. (Page 47)
1F, F, F, 8F, 1F, 1s
INTERVAL TIME (Camera) Selects the interval time for interval recording. (Page 46)
F, F, 8F, 1F, 1s, s, s, 10s, 0s, 1m, m, 10m
PREREC MODE (Camera) Sets PRE RECORDING to ON or OFF. (Page 46)
ON, OFF
MIC ALC (Camera) Sets mic level auto control to ON or OFF. (Page 52)
ON, OFF
Set to ON to reduce distortion at high input levels.
This setting does not change the audio signal recording level. Use the
AUDIO control knob to adjust the audio signal recording level.
MIC GAIN 1 (Camera) Sets the input level of the external microphone connected to the INPUT
1 terminal. (Page 51)
-0dB, -0dB
Setup menu list (continued)
AUTO SW screen (continued)
___indicates the factory setting.