Panasonic AG-HPX170 - Manual (Page 6)

98
Setup menu list
SCENE FILE screen
Item
Display
mode
Description of settings
LOAD/SAVE/INIT (Camera) LOAD:
Loads the scene file settings saved using SAVE.
SAVE:
Saves the changed scene file settings.
INITIAL:
The settings of the scene file selected with the scene file dial are
returned to the factory settings.
OPERATION TYPE (Camera) Switches the shutter and frame rate operation to the video type or film
type.
VIDEO CAM: SYNCRO SCAN is displayed using 1/n units.
FILM CAM: SYNCRO SCAN is displayed as an angle.
FRAME RATE (Camera) Selects the shooting interval and exposure time when 720P and FILM
CAM is selected. The DEFAULT value is dependent on the frame rate
of the recording format.
DEFAULT, 1, 1, 18, 0, 1, , , , , 7, 8, 0, , , , 0,
, 8, , 0 FRAME
SYNCRO SCAN (Camera) Adjusts the synchro scan shutter speed used for shooting images on a
TV screen, etc.
Pushing the Operation lever the e or r direction and holding it down
will cause the values to change at a faster rate.
When VIDEO CAM is selected as the OPERATION TYPE option
setting:
60P/60i:
1/60.0...1/249.8
30P/30PN:
1/30.0...1/48.0...1/249.8
24P/24PA/24PN:
1/24.0...1/48.0...1/249.8
When FILM CAM is selected as the OPERATION TYPE option setting:
The shutter speed is displayed as an angle such as “180.0 d.”
10.0 deg...180.0 deg...360.0 deg (the angle can be changed in
increments of 0.5 degrees)
•
•
•
DETAIL LEVEL (Camera) Adjusts the level of the image outline correction (in the horizontal and
vertical directions).
-7...0...+7
V DETAIL LEVEL (Camera) Adjusts the level of outline correction in the vertical direction.
-7...0...+7
DETAIL CORING (Camera) Adjusts the level of noise reduction of the detail signal.
-7...0...+7
Set to – for a clearer image. Noise increases slightly.
Set to + to reduce noise.
CHROMA LEVEL (Camera) Adjusts the chroma level.
-7...0...+7
CHROMA PHASE (Camera) Makes fine adjustments to the chroma phase.
-7...0...+7
COLOR TEMP Ach (Camera) Makes fine adjustments to the color temperature (after white balance
Ach adjustment).
-7...0...+7
COLOR TEMP Bch (Camera) Makes fine adjustments to the color temperature (after white balance
Bch adjustment).
-7...0...+7
MASTER PED (Camera) Adjusts the master pedestal (black level of the image) as the basis for
images.
-100...0...+100
A.IRIS LEVEL (Camera) Sets the desired AUTO IRIS level.
-10...0...+10