Panasonic AG-HPX170 - Manual (Page 14)

10
Item
Display
mode
Description of settings
UB MODE (Camera)
(MCR)
Set the content for user information.
USER:
Records the information of user.
TIME:
Records the time at recording.
DATE:
Records the date at recording.
TCG:
Records the values of the time code generator.
FRM. RATE:
Records the frame rate information for frame conversion.
a b c d
a: Checking information for user information
b: Frame sequence No.
0 to 4 are displayed in the 24P/24P (ADV) mode.
F is displayed in the 60i/30P mode.
c: Frame rates
Frame rate (60/30/24)
I/P ID
Conversion data
Frame rate coefficient
d: Recording management data
Frame update information
REC START/STOP information
<Note>
To play back a clip recorded with native recording
To change 1394 output user information to frame rate information,
change this setting to FRM.RATE and play back the clip. The user
information displayed on the screen at this time is changed to frame
rate information.
•
•
•
•
•
•
•
•
UB PRESET (Camera)
(MCR)
Sets the user information. Select USER in UB MODE.
19 IN PRESET (MCR) Synchronizes the internal TCG value with the TC of 1394 input when
you press the TC SET button.
ON: The synchronization mode is on.
OFF: The synchronization mode is off.
TIME STAMP (Camera) Determines whether or not date and time information will be
superimposed on the image.
ON: Superimposes date and time information on the image.
OFF: Does not superimpose date and time information on the image.
<Note>
When DATE/TIME on the DISPLAY SETUP screen is set to OFF, the
date and time information is not superimposed.
Setup menu list (continued)
RECORDING SETUP screen (continued)
___indicates the factory setting.