Panasonic TC 15DT2 User Manual
Page 43
43
Press SELECT ( , , , ) button to select
the item and press ENTER.
5
What is playback control?
If a Video CD has “playback control” written on its disc or
jacket, it means that particular scenes or information can
be selected for viewing interactively with the TV monitor
using the menu screen.
While watching movies
•
Raising dialogue volume
The volume for the dialogue can be raised by displaying the
GUl screen (for player information) and setting “Dialogue
Enhancer” to “ON”. (See page 49.)
This setting takes effect only for discs which are recorded with
Dolby Digital/dts (2 channel or over) and with the
dialogue contained in the center channel.
When the menu continues onto another screen
After step 4 on page 42, press SKIP (
).
•
To return to the previous menu screen
Press SKIP (
)
•
Due to the design of some software titles, SKIP (
,
)
may not always work. For operation, refer also to the jacket of
the disc concerned.
Stopping play and returning to the menu screen
Press DVD MENU or TOP MENU.
Play is suspended, and the menu screen is displayed.
•
The buttons may not work depending on the disc used.
After operation
When the player is not in use, remove the disc and press POWER
to set the player to the standby mode.
Note
•
The disc continues to rotate while the menu is displayed even
after the player has finished playing a particular item. When
no further selections are to be played, be sure to press STOP
to clear the menu display.
For your reference:
•
When
appears on the TV monitor when a button is pressed,
the operation is prohibited by the player or disc.
Stopping play
Press STOP during play.
RESUME function
The player records the point where STOP was pressed during play.
•
Press PLAY again, and play will resume from this point.
•
When the tray is opened or STOP is pressed again, the
RESUME function will be cleared.
This feature remains active if the player is set to the standby
mode and then turned back ON.
Chapter review function (DVD only)
When PLAY is pressed while
RESUME function the message
shown on the right is briefly displayed.
If PLAY is pressed again while the above message is displayed
on the screen, the first few seconds of each chapter from the
beginning of the title up to the point where operation was stopped
will be played. This makes it possible to review previous chapters.
Normal playback will commence from the point where operation
was stopped.
Note
•
Cancelling the RESUME function will also clear the chapter
review function.
•
The chapter review function may not work with some DVDs.
Press PLAY to Chapter Review
Play of the selected item now begins.
(Example )
Lovers
Birds
of the world
Dogs
Castles
T I T L E M E N U
B i r d s