Connecting the antenna cable to the rf in terminal, Antenna / cable connection, Installation – Panasonic TC 15DT2 User Manual

Page 8

Advertising
background image

8

Incoming Cable From Home Antenna (75 Ohm)

Cable Connection - For reception of cable channels (01 - 125) connect the cable supplied by your local cable company. Antenna
Mode must be set to CABLE. (Refer to Antenna Mode section.)

Incoming 75 Ohm Cable (From Cable Company)

VHF/UHF

on left side of Set

Note:
Certain cable systems offset some channels to reduce interference or have Premium (scrambled) channels. A cable
converter box is required for proper reception. Check with your local Cable company for its compatibility
requirements.

Connecting the Antenna Cable to the RF In Terminal

DC IN
15V

ANT

UHF Antenna

RF In Terminal

VHF Antenna

Mixer

75 Ohm
Coaxial Cable

Coaxial Antenna Plug

DVD
DIGITAL
AUDIO OUT
(PCM
/BITSTREAM)
OPTICAL

Antenna Connection - For proper reception of VHF/UHF channels, an external

antenna is required. For best reception an outdoor antenna is
recommended. Antenna Mode must be set to TV.

Installation

Antenna / Cable Connection

VHF/UHF

on left side of Set

Advertising