Panasonic TC 15DT2 - Manual (Page 59)

59
At the initial settings screen (on page 56)
Press SELECT ( , ) to Select “3 Menu
Language” and press ENTER.
1
This is to select the language to be used in the On-Screen Display
menus which the player will show on the TV monitor.
1 English
2 Français
3 Español
Press RETURN to cancel
Select the language
for these Menus.
Also refer to “Common procedures” on page 56.
When “2 Color and Position” is selected
The colors and positions are set as follows:
1 Blue (Factory preset)
2 Violet
3 Green
4 Blue
5 Violet
6 Green
Selecting On-Screen Display menu
language
The screen illustrated in step 1 is displayed. Select “0” with the
SELECT ( , ) button and press ENTER to return to the initial
settings screen.
Also refer to “Common procedures” on page 56.
For your reference:
• When is selected, “Play”, “Still” and other displays
as well as GUI screens will be displayed at a little lower position
than the factory setting. It is recommended to choose this
setting if the screen is only partially displayed.
Initial settings
Selecting On-Screen Display Messages
At the initial settings screen (on page 56)
Press SELECT ( , ) to select “4 On-
Screen Messages” and press ENTER.
1
You can select whether “Play”, “Still” and other displays will be
displayed or not, and the color and position of “Play”, “Still” and
other displays as well as GUI screens.
On-Screen Messages
1 On-Screen Messages On
2 Colour and Position Blue
0 Exit
2
Press SELECT ( , ) to Select the language
and press ENTER.
1 English:
English is selected. (Factory preset)
2 Français / 3, Español :
The language is selected.
Setting is finished and the initial settings screen is displayed.
2 Press SELECT ( , ) to select the setting
and press ENTER.
When “1 On-Screen Messages” is selected
1 On: “Play”, “Still” and other displays will always appear
on the TV screen. (Factory preset)
2 Off: “Play”, “Still” and other displays will not appear on
the TV screen.