Display panel instructions – Panasonic KV-S6050W User Manual
Page 26
26
Display Panel Instructions
•
Scanning settings 01-18 must be saved using setting “19 Save Scanning Settings (Execution)”.
Even if they are not saved, they will be applied. If the power is turned off, the next time the unit is used they will
not be applied.
18 Scanning method
Host : The documents placed either on the ADF or on the
flatbed are scanned in response to commands from
the host computer.
FB
: The documents placed on the flatbed are scanned.
19 Save “Scanning Settings”
(Select memory)
19 Save “Scanning Settings”
(Execution)
When pressing the
1
key and the
2
key simultaneously, the
scanning conditions set in 01 to 18 above will be saved in the
memory selected in the “Save Scanning Settings (Select
memory)”.
“Completed” will be displayed after saving.
20 Load scanning setting
•
If you use the
1
key or the
2
key to select Memory 1 or
Memory 2, the saved scanning items will become valid by
the “Save Scanning Settings (Execution)”.
If other scanning items have been saved in another memory,
during scanning you can change the scanning items easily.
This setting will not be changed even if the power is turned
off and on, and will remain valid.
•
If “Default” is selected, all of the saved scanning settings will
return to the default values. (See “01” to “18” of the left side
display.)
1 8 . S c a n
H o s t
M e t h o d
FB
Host
1 9 . S a v e
S e t
t
i n g
M e m o r y
1
Memory 1
Memory 2
1 9 . S a v e
E x e c
l
S e t
t
i n g
2 0 . L o a d
D e f a u l
t
S e t
t
i n g
Memory 1
Memory 2
Default