Panasonic KV-S6050W User Manual
Page 56
56
Replacing Consumable Roller Modules
11
Pull the right side of the shaft in the
direction of arrow (
1
), and hold it
there.
Pull the retard roller module in the
direction of arrow (
2
), and then
remove it.
12
Take out the retard roller module in the
optional “Roller Exchange Kit
(KV-SS044)”.
For supplies and accessories:
Call 1-800-346-4768 (U.S.A. only) or
your dealer.
13
Pull the right side of the shaft in the
direction of arrow (
1
) and hold it
there.
Attach the new retard roller module as
shown in the direction of arrow (
2
).
Return the right side of the shaft as
shown in the direction of arrow (
3
).
•
Confirm if pin A and pin B are inserted in
their notches correctly.
•
Attach the retard roller module so that the
notch A is on the left side.
1
2
Retard roller module
Shaft
Retard roller module
When the pin is not inserted in the notch properly,
it may cause double feeding or a paper jam.
Shaft
1
2
3
Notch A
Pin A
Pin B
Notch B