Panasonic KX-FC228HK - Manual (Page 44)

7. Answering Machine
44
*1 If pressed within the first 5 seconds of a message,
the previous message will be played.
*2 To resume operation, press a command key within
10 seconds.
Recording a marker message
After playing back the messages, you can leave an
additional message.
1. Wait for 3 beeps indicating the end of the remote
operation.
2. Wait about 10 seconds.
3. Hear the voice guide and/or hear 1 beep.
4. Leave a message.
To turn ON the auto answer setting
1. Call your unit and let it ring 15 rings.
L A beep will sound.
2. Enter the remote operation ID (page 43, feature #11
on page 46) within 10 seconds.
L The receiving mode will be set to TAM/FAX or
FAX ONLY mode, depending on the setting of
feature #77 (page 50).
3. Hang up the handset.
Note:
L You cannot turn ON the auto answer setting when the
unit is set to TEL/FAX mode.
Key Remote command
{ 1} Repeats a message (during
playback)
*1
{ 2} Skips a message (during playback)
{ 4} Plays new messages
{ 5} Plays all messages
{ 6} Plays greeting message
{ 7} Records greeting message
{ 9} Stops current operation
*2
{ 0} Turns OFF auto answer setting
{*}{ 4} Erases a specific message (during
playback)
{*}{ 5} Erases all messages
{*}{ 6} Erases greeting message (during
greeting message playback)
{*}{#} Ends remote operation
{#} Skips the greeting message
FC228HK-PFQX2656ZA-en.book Page 44 Thursday, August 31, 2006 11:35 AM