Panasonic KX-FC228HK - Manual (Page 53)

8. Programmable Features
53
Using the base unit PIN/repeater
1. {j/OK}
2. Press {^} or {V} to select “ Base Unit Setup”. i {>}
3. Press {^} or {V} to select the desired item in the base unit settings menu. i {>}
4. Press {^} or {V} to select the desired item in the sub-menu. i {>}
5. Press {^} or {V} to select the desired setting then press {>} or follow the instruction in the rightmost column of the
chart.
L To exit the operation, press {ih}.
*1 If you change the PIN, please make note of your new PIN. The unit will not reveal the PIN to you.
*2 If you forget your PIN, consult your nearest Panasonic service centre.
*1 When this setting is changed using the cordless handset, the setting for the base unit will also be changed, and
vice versa.
*2 This setting can be changed individually for the base unit and the cordless handset.
– To set the base unit ringer volume, see page 16.
– To set the base unit ringtone for outside calls, see feature #17 on page 46.
– To set the base unit LCD display contrast, see feature #39 on page 48.
*3 If you select one of the melody ringtones, the ringtone will continue to sound for several seconds if the caller
hangs up before you answer. You may hear a dial tone or no one on the line when you answer a call.
The preset melodies in this product are used with permission of © 2006 Copyrights Vision Inc.
*4 The preset melodies in this product are used with permission of © 2006 Copyrights Vision Inc.
*5 If “
Off” is selected, only current date and time are displayed.
If “ Handset Number” is selected and the current cordless handset number is 2, “[2]” is displayed.
*6 This feature alerts you when new messages have been received or recorded:
– SMS (page 25)
– Telephone answering machine (page 42)
The message indicator on the cordless handset flashes until you have listened to all new messages.
While message alert is ON, battery operating time is shortened (page 15).
*7 Auto talk feature allows you to answer calls simply by lifting the cordless handset OFF the base unit. You do not
need to press {C}.
Base unit settings menu Sub-menu Feature (default setting)
“ Call Options” “ Call Restrict” page 54
“ Other Options” “ Base Unit PIN” Change base unit PIN (“ 0000”). *1
– Enter the current 4-digit base unit PIN.
*2
i Enter the new 4-digit base unit PIN.
i {j/OK}
“ Repeater Mode” (“ Off”): page 55
FC228HK-PFQX2656ZA-en.book Page 53 Thursday, August 31, 2006 11:35 AM