Test i2c – Philips FMod-TCP BOX User Manual
Page 26
Advertising
26 / 58
Test I2C
This page can be used to access I2C bus.
The panel is divided in two parts:
The part on the right allows scanning the I2C bus to find available
slave devices.
The part on the left allows sending a read or a write command to a
device on the I2C bus.
You should first check if you want a read or a write. Then you have to write
hex data to write to the device in the "Hex data to write" field (if you
FMod-TCP User Manual v.2.8
Advertising