Philips FMod-TCP BOX - Manual (Page 7)

7 / 58
"Question & Answer" oriented. The PC should send a Question, wait for the
Answer and so on.
To configure the device's parameters and to access I/O and A/D features,
the protocol uses an Internal Registers Access routine (see chapter 4 and 7).
The code samples available on the
FiveCo's web site can help programmers
get started with development.
Hardware description
Power connector
12 – 32 VDC
Inputs, Outputs, I2C bus,
Supply voltage, 5V and GND
RS232 connector
Dimensions in mm
Ethernet connector SOS button
Beware:
Before connecting any cable to the device, shut down power supply!
Front view
RJ45 Ethernet connector SOS button
FMod-TCP User Manual v.2.8