Panasonic AG-MX70P - Manual (Page 31)

31
Effect-by-effect setting screens
Pos. X 128 Y 128
Z
196
Event ME Time Pattern INT
00
E
10:00
F
0013 Wht
Transition
Modify
Pattern
Edge Hard
Width
32
Color
White
Effects
Off
Off
The settings for the transition and key patterns are performed on these screens. The items that can be set differ from one
pattern to another. The LCD display changes as soon as one of the patterns is selected. The key slice, slope, key level,
crop, edge, effects and DVEPlus settings are stored in the memory for each effect group. If the system was started using
Reset, the default settings are established. Furthermore, the 3D modify settings are stored for each pattern group.
[Transition] wipe pattern settings
The transition wipe patterns (numbers 1 to 2999) are opened directly or when selected using the number keys.
<Note>
When transition numbers 200 to 222 (1001 to 1004, 1021 to 1023, 1030 to 1034 and 1059 to 1069) and 1981 to 1983 are
selected, the pattern is changed to MIX (56).
[Modify] settings
The item to be changed in the pattern is selected from [Off],
[Comp] (compression), [Slide], [Multi] and [Blinds] using the
rotary 2 control. The default setting is [Off].
The levels applying when the settings are selected are set
using the rotary 3 control.
With the [Comp] setting: ....... [Single] or [Both]
With the [Slide] setting: ........ [Single] or [Both]
With the [Multi] setting: ......... [H3], [V3], [HV3], [H6], [V6],
[HV6], [Pair], [H3 Pair], [V3
Pair], [HV3 Pair], [H6 Pair],
[V6 Pair], [HV6 Pair]
With the [Blinds] setting: ...... None
Only the basic patterns and their related patterns can be
set.
Modify
Off
Off
Comp
Slide
Multi
Blinds
R1 R2 R3 R4 R5
R1 R2 R3 R4 R5