Panasonic AG-MX70P - Manual (Page 55)

55
[Setup] initial setting screen
[Memory] setting
This is used to set the memories used for INTVideo and
DSK. When the setting is changed, all the memories are
cleared. How much memory is to be used for [INT V] and
how much for [Title] for DSK and TitleKey is set using the
rotary 2 and 3 controls.
If the allocation to one memory is changed, the allocation to
the other memory will change so that the total remains 30.
When a change is to be made, [OK?] appears. Execute the
change using [Enter], and use [Shift] + [Enter] to cancel.
The default setting is 15 each for [INT V] and [Title] with
NTSC and 13 each for [INT V] and [Title] with PAL.
Memory INT V
15
Title
15
0 - 30/26 0 - 30/26
[Gen Lock] external synchronization setting
Select [G/L] or [ExtKey] as the [Ref In] (reference) source
using the rotary 2 control. The default setting is [G/L].
Adjust the [H Phase] (horizontal phase) using the rotary 3
control. The default setting is 128.
Adjust the [SC Phase] (subcarrier phase) using the rotary 4
control. The default setting is 512.
[H Phase] and [SC Phase] are stored in the memory
separately in accordance with [G/L] or [Ext Key] for the
input.
Gen
Lock
Ref In
G/L
H Phase
128
SC Phase
512
G/L
Ext Key 28 - 228
[Video Format] setting
Either [NTSC] or [PAL] is selected as the format by the
rotary 2 control.
The default setting is the format used in the area where the
system was purchased.
When a change is to be made, [OK?] appears. Execute the
change using [Enter], and use [Shift] + [Enter] to cancel.
Set [4:3] or [16:9] as the [Aspect] ratio of the patterns using
the rotary 3 control. The default setting is [4:3].
Video
Format NTSC
Aspect
4:3
Setup
0
Pb Pr
BCAM
NSTC
PAL 4:3
16:9 0
7.5 BCAM
MII
0 - 1023
R1 R2 R3 R4 R5
R1 R2 R3 R4 R5
R1 R2 R3 R4 R5
Select [0] or [7.5] for [Setup] using the rotary 4 control. The default setting is [0].
Select [BCAM] or [MII] for the [Pb Pr] component level using the rotary 5 control. The default setting is [BCAM].
When the NTSC or PAL format is changed, the system is initialized, and the [INT V] and title memories are cleared.