Panasonic AG-MX70P - Manual (Page 34)

34
Effect-by-effect setting screens
Pos. X 128 Y 128
Z
196
Event ME Time Pattern INT
00
E
10:00
F
3101 Wht
Chroma Key 1 R = - - - G = - - - B = - - -
Key
Color
Cancel
Offset
128
C Slice
128
C-Area
3
Mono L
6
Crop A
2
8
12
7
12
Effects
Off
DVE
Plus Off 6301
3D
Modify
Rotate
0
Time
0
TransF
255
KeyColor
1
Slice1
128
Slope1
8
K Level
255
[Chroma Key] setting
The chroma key is opened directly or when selected using the number keys. ME is automatically selected for the Preview
output, and the chroma key cursor and keyed output are displayed.
Display of selected
number: 1, 2 or 3 is
selected.
Selected color display
Displayed only
with 3Dop
Displayed by DVEPlus
only with special
patterns
Scrolled
display
[Key] setting
Up to three colors to be removed can be stored in the
memory. After selecting the number of the color using the
rotary 2 control, align the cursor on the chroma key preview
screen with the color (blue) that is to be removed, using
joystick X and Y, and store the color in the memory using
[Enter]. The previous values will be overwritten in this
process. To release a color which has been stored in the
memory, press [Shift] + [Selected number].
The [Slice] level of the selected colors can be set to any
value from 0 to 225 using the rotary 3 control.
The [Slope] level setting of the selected colors can be set to
any value from 0 to 15 using the rotary 4 control.
The [K Level] key (transparency) level can be set to any
value from 0 to 255 using the rotary 5 control. This setting
is valid for all the colors stored in the memory. It can also
be set separately from the other keys.
Key KeyColor
1
Slice1
128
Slope1
8
K Level
255
0 - 15 0 - 255 1 - 3 0 - 255
R1 R2 R3 R4 R5
R1 R2 R3 R4 R5
6
A
Border Color
White