Panasonic AG-MX70P - Manual (Page 59)

59
Select the item to be set, and press the [ME], [DSK] or
[FADE] button.
Input the numerical value using the number keys, and press
[Enter].
The numerical value can be incremented and decremented
using rotary TIME or the “+” and “–” keys.
Set the ME (back, key transition), DSK or fade time.
Set the time of the item selected for ME, DSK or Fade
above the number keys.
The time is indicated on the LCD display. It can also be
input or output using the number keys.
With x:xx displays, it is possible to input [2][.][5] to display
2:05 where [.] is used as a delimiter.
The default setting is 60F.
Transition time setting
ME Time
10:00
F
7 8 9
6 5 4
Mod i f y
CONTRAST
PHONE
PATTERN ME DSK FADE
MIN MAX
TIME
DR
Transition time selection
Other settings
Correlation between number key settings and [Pattern] button
[Pattern] takes precedence over [ME], [DSK] and [Fade].
Items selected by ME, DSK or Fade can be set by the rotary controls. The number keys can also be used when Pattern is
OFF. The items selected appear on the LCD display.
There are three options—ME, DSK and Fade—and they can be set to OFF by pressing the ON button. In this case, neither
the rotary controls nor the number keys can be used.
Number key priorities
The number key priorities are: event memories > pattern settings > transition time settings > LCD screen settings.
In the event memories, the number keys cannot be used for pattern settings, transition time settings or LCD screen settings.