Panasonic 2000 - Manual (Page 23)

23
Making and Answering Calls
For fax advantage assistance, call 1-800-435-7329.
Voice calls - making
1 Handset is off the main unit:
Press .
● The TALK indicator will light.
Handset is on the main unit:
Lift the handset and press .
● The TALK indicator will light.
2 Dial the telephone number.
● If you misdial, press and start
again from step 1.
3 When finished talking, press or
place the handset on the main unit.
● The TALK indicator will turn off.
TALK
TALK
TALK
TALK
REDIAL/PAUSE
TALK
TALK indicator
CH
Note:
● If an alarm tone sounds when you press ;
—move towards the main unit, or
—place the handset on the main unit.
Then try again.
● If the TALK button on the handset is pressed while
using the main unit, the call is switched to the
handset and the main unit is disconnected.
● The dialing mode is set to “TONE” as the default
setting. If you cannot dial, change to “PULSE” with
feature #13 (p. 55).
TALK
To redial the last number
Regardless of whether the main unit or the
handset was used, the last number dialed will be
redialed.
1. Press .
2. Press .
If noise interferes with the conversation
Press to select a clear channel or move
closer to the main unit.
CH
REDIAL/PAUSE
TALK
While the handset is in use
On the main unit, the IN USE indicator lights and
the following will be displayed.
Display: CORDLESS IN USE
IN USE
LIGHT
With the handset