Panasonic 2000 - Manual (Page 28)

28
Automatic Dialing (Handset)
Storing telephone numbers in the handset
Making a voice call with the handset using
stored numbers
1 Press .
● The TALK indicator will flash.
2 Enter the telephone number up to 22 digits.
● If you misdial, press to end
storing, and start again from step 1.
3 Press .
4 Press a memory station number (0 to 9).
● A one beep confirmation tone will sound.
● The TALK indicator will turn off.
● To store other numbers, repeat steps 1 to 4.
AUTO
PROGRAM
PROGRAM
TALK indicator
AUTO
PROGRAM
Note:
● Numbers stored in the handset cannot be accessed
by the main unit.
● A pause entered in a telephone number counts as
one digit.
1 Press .
● The TALK indicator will light.
2 Press .
3 Press the desired memory station number
(0 to 9).
● The stored telephone number will be dialed.
4 When finished talking, press .
● The TALK indicator will turn off.
TALK
AUTO
TALK
TALK
TALK indicator
AUTO
Note:
● Numbers stored in the handset cannot be accessed
by the main unit.
● For further details on handset operation, see page 23.
To erase a stored number
1. Press .
2. Press .
3. Press the memory station number (0 to 9)
you want to erase.
● 1 beep sounds and erasing is completed.
AUTO
PROGRAM
You can store up to 10 telephone numbers in the handset. The dial keys (0 to 9) function as
memory stations. Make sure the TALK indicator is off.