Panasonic 2000 - Manual (Page 56)

“ON”: The unit will print the journal
report automatically after every 30
new fax communications (p. 37).
Features Summary
56
How to set menu options
1. Press .
2. Rotate until the following is displayed.
Display:
Press and rotate until the desired
feature is displayed.
3. Press .
4. Rotate until the desired setting is displayed.
5. Press .
6. Press . MENU
SET
JOG DIAL
SET
JOG DIAL SET
ADVANCED MODE
JOG DIAL
MENU
Programming table
Code
#22
To print the journal report
automatically for fax communications
AUTO JOURNAL
ON
OFF
To send a document:
1. Insert the document.
2. Follow steps 1–3 above.
3. Rotate
to select “ON”.
4. Press .
5. Enter the fax number.
6. Press
.
7. Enter the transmission start time.
Press to select “AM” or “PM”.
8. Press .
9. Press .
● To cancel after programming,
press
then . SET STOP
MENU
SET
SET
SET
JOG DIAL
“NEXT FAX”: For the next
attempted fax transmission. After
transmission, the unit will return to
the previous setting.
“ERROR”: When previous fax
transmission fails and you redial
the same number.
● This feature is not available for
broadcast transmission.
● The calling charge may be higher.
#23
If you have difficulty sending an
overseas fax, activate this feature
before starting transmission. This
feature makes sending documents
easier as the transmission speed is
slowed down.
OVERSEAS MODE
Display & Feature Settings How the unit operates
#25
To send a fax automatically at a
specified time.
This allows you to take advantage
of low-cost calling hours offered by
your telephone company.
● The setting can be reserved to
take place up to 24 hours in
advance.
DELAYED SEND
NEXT FAX
ERROR
OFF
ON /
fax no. /
hh:mm
OFF
(The default setting is in bold type.)
Advanced features !
Note:
● Step 4 may be slightly
different depending on the
feature.
● See page 54 for more details.