Panasonic SC-HC40 - Manual (Page 11)

RQTX1146 RQTX1146 RQTX1146 RQTX1146
11
ENGLISH
This is a 12-hour clock.

Press [CLOCK/TIMER] to select “CLOCK”.
 Within 5 seconds, press [e,r] to set the time. (Press and hold to
change the time faster.)
 Press [OK].
To display the clock, press [CLOCK/TIMER].
Reset the clock regularly to maintain accuracy.
•
•
Setting the clock
You can set the timer to come on at a certain time to wake you up.
This unit offers 3 optional play timers.
Preparation:
Turn the unit on and set the clock (➡ above).
Prepare the music source (disc, radio, iPod
® /iPhone, Bluetooth, USB
or AUX) and set the volume.
 Press [CLOCK/TIMER] repeatedly to select play timer.
 Within 5 seconds, press [e,r] to set the starting time.
 Press [OK].
 To set the finishing time, repeat step  and .
To activate the timer

Press [z, PLAY] repeatedly to turn the selected play timer on.
 Press [^] to turn the unit off.
•
•
Play timer
Change the settings Repeat step  to  (➡ above).
Change the source
or volume  Press [z, PLAY] twice to clear zPLAY
indicator from the display.
 Make changes to the source or volume.
 Perform step  and  (➡ above).
Check the settings
(When the unit is on
or in standby mode) Press [CLOCK/TIMER] repeatedly to select
“zPLAY 1”, “zPLAY 2” or “zPLAY 3”.
Cancel Press [z, PLAY] twice to clear the timer
indicator from the display.
The timer will start at the preset time, with the volume increasing
gradually to the preset level. •
Sleep timer
The sleep timer can turn the unit off after a set time.
Press [SLEEP] to turn the sleep function on or off.
Press [SLEEP] once to check the remaining time.
The play timer and sleep timer can be used together. The sleep timer
always has the priority. Be sure not to overlap the timer settings.
When AUTO OFF is ON and the unit is left unused for about 30
minutes, the unit will shut down even if the play time or sleep time has
not expired.
•
•
30MIN 60MIN 90MIN 120MIN
OFF (Canceled)
Preset EQ Press [PRESET EQ] repeatedly to select
“HEAVY”, “SOFT”, “CLEAR”, “VOCAL” or
“FLAT”.
Bass or Treble  Press [BASS/TREBLE] repeatedly to select
“BASS” or “TREBLE”.
 Press [e,r] to adjust the level (-4 to +4).
Surround Sound Press [SURROUND] repeatedly during play to
select “ON SURROUND” or “OFF SURROUND”.
If interference in FM stereo reception increases,
cancel the surround sound effect.
D.Bass Press [D.BASS] repeatedly during play to select
“ON D.BASS” or “OFF D.BASS”.
Re-master Press [RE-MASTER] repeatedly during play to
select “ON RE-MASTER” or “OFF RE-MASTER”.
Digital remaster is effective on MP3.
Analog remaster is effective on iPod
® /iPhone
and AUX.
•
•
Sound adjustment
11
Timer External unit
The USB connectivity enables you to connect and play MP3 tracks from
USB mass storage class.
Preparation:
Before connecting any USB mass storage device to the unit, ensure
that the data stored therein has been backed up.
It is not recommended to use a USB extension cable. The device
connected via the cable will not be recognized by this unit.
 Open the USB cover.
 Reduce the volume and connect the USB mass storage device.
 Press [USB q/h] to start play.
•
•
Stop Press [g, ]. “RESUME” is displayed. The
position is memorized.
Press
[USB q/h] to resume play.
Press [g, ] again to clear the position.
Pause Press [USB q/h]. Press again to resume play.
Skip track Press [u] or [i].
Skip album Press [e,r].
Direct access play
(Play starts with the
track you select.)  Press [e,r] to select the album.
 Press [i] once and then the numeric
buttons to select the track.
USB mass storage device (not included)
R
USB operations
Compatible devices
To remove the USB mass storage device, select a source other than
“USB”.
Removing the USB mass storage device with it selected as a source
can damage the data stored in the device. •
Devices which are defined as USB mass storage class:
USB devices that support bulk only transfer
USB devices that support USB 2.0 full speed •
•
For other operating functions, they are similar as those described in
“Disc operations” (➡ page 9, 10).
Notes on USB
Supported format: Files with extension “.mp3” or “.MP3”
CBI (Control/Bulk/Interrupt) is not supported.
A device using NTFS file system is not supported [Only
FAT 12/16/32 (File Allocation Table 12/16/32) file system is
supported].
Depending on the sector size, some files may not work.
This unit can access up to 255 albums and 2500 tracks.
The maximum number of tracks in a folder is 999 tracks.
Only one memory card will be selected when connecting a
multiport USB card reader, typically the first memory card
inserted.
Disconnect the USB card reader from the unit when you remove
the memory card. Failure to do so may cause malfunction to the
device.
When you connect the digital audio player to the USB port, it
charges all the time when the unit is on. •
•
•
•
•
•
•
•
•