Philips WORKIO DP-C262 - Manual (Page 28)

28
Chapter 3 Scanner Settings
Chapter 3
Scanner Settings Setting the Scanning Quality
Documents, whether in Full Color or Monochrome, are scanned in three-colors.
z Color mode settings are reset to their factory defaults when:
-The machine is turned Off.
-The Reset key is pressed.
-A scan job is completed.
1
Select “Basic Menu”.
2
Set the desired scanning modes.
Quality Adjustment
„ Color Setting
1
Select the Color Mode, and then “OK”.
Quality Adj. (see page 28)
File Type and Name (see page 36)
(Continue from step 3)
Original Size:
From Platen Glass only.
When the original size is not correctly
detected, select “Original Size”, and then
select original size and touch “OK” on the
display.
2-Sided Original (see page 38)
Job Build and SADF (see page 39)
Multi-Size Feed:
When scanning mixed size originals, select
“Multi-Size Feed”.
Ex: 8.5 x 11" and 11 x 17" size originals
Full Color Mode
Color Original Three-colors
(Red, Green
and Blue)
Grayscale Mode
Color Original Grayscale
(Halftone)
Black Mode
Color Original Monochrome
(Bi-level)
Monochrome Original Monochrome
(Bi-level)