Chapter 3 scanner settings – Philips WORKIO DP-C262 User Manual
Page 39
39
Chapter 3 Scanner Settings
When Scanning the Special Originals (Thin paper, etc.)
from ADF
Special originals (like thin paper, etc.) can be fed from the ADF and scanned continuously using the
Job Build and SADF Mode.
1
Place one original.
(Minimum 50 g/m
2
)
z
For instructions on how to place originals,
refer to Basic Operation Procedure (see
page 6). For more details, refer to Placing
Originals (Copy) in the Operating
Instructions (for Basic Operations).
2
Press the Scan/Email key.
3
Select “Basic Menu”.
4
Select “Job Build and SADF”.
5
Select "Address Book", and then
select a destination.
z
For more details, refer to Basic Operation
Procedure (see page 6).
6
Press the Start key.
z
Place the next original within 5 sec. of last
scanned original.
z
If “Another Original? Yes or No” message is
displayed, select "No" if you do not have any
more documents to scan.
z
When canceling the operation, press the Stop key
on the Control Panel, and then select “Yes” on the
Touch Panel Display.