Philips WORKIO DP-C262 - Manual (Page 30)

30
Chapter 3 Scanner Settings
Scanning Resolution
You can set the appropriate resolution according to your originals.
z The standard setting of “Resolution” can be changed, refer to Scanner Settings in the Operating Instructions
(For Function Parameters) on the provided CD-ROM.
z Resolution settings are reset to their factory defaults when:
-The machine is turned Off.
-The Reset key is pressed.
1
Select a desired resolution, and then
select “OK”.
z Most originals such as photos can be
scanned without problems using the default
resolution (200 dpi) and picture quality level
(Full Color).
To scan smaller characters (8-point or
smaller) clearly, increase the resolution or
select Adjustment, and then select High
Quality for Compression (Full Color).
Since the file size increases with higher
resolutions, the transfer time becomes
longer depending on the specifications of
the network and computer you are using.
Example: The time required for transferring
an A4 size color photo scanned
at 600 dpi is three times as long
as that for the same photo
scanned at 200 dpi.