Using the initial settings menu, Video output settings, Initial settings menu – Pioneer HTZ272DVD User Manual
Page 29: Initial settings menu 08, Chapter 8
Initial Settings menu
08
29
En
Engli
sh
Françai
s
Deut
sch
Nederland
s
Italiano
E
spañol
Chapter 8
Initial Settings menu
Using the Initial Settings menu
The Initial Settings menu provides audio and
video output settings, parental lock settings,
and display settings, among others.
If an option is grayed out it means that it
cannot be changed at the current time. This is
usually because a disc is playing. Stop the
disc, then change the setting.
1
Press DVD/CD.
2
With playback stopped, press HOME
MENU and select ‘Initial Settings’.
3
Use
/// and ENTER to select the
setting and option you want to set.
All the settings and options are explained on
the following pages.
1
Video Output settings
Note
1 • In the table, the default setting is shown in
bold: other settings are shown in italics.
• Some settings, such as
TV Screen, Audio Language and Subtitle Language may be overridden by the DVD disc. Often
these settings can also be made from the DVD disc menu.
• The
HDMI Resolution and HDMI Color settings only need to be set if you connected this player to an HDMI-compatible
component using the HDMI connector.
2 This setting can only be used when you are connected via HDMI and have the HDMI resolution set to 1920x1080p, 1920x1080i
or 1280x720p. When using this setting, only the HDMI connection is available.
Initial Settings
Setting
Option
What it means
TV Screen
(See also Screen sizes
and disc formats on
page 41.)
4:3 (Letter Box)
Set if you have a conventional 4:3 TV. Widescreen movies are
shown with black bars top and bottom.
4:3 (Pan & Scan)
Set if you have a conventional 4:3 TV. Widescreen movies are
shown with the sides cropped so that the image fills the screen.
16:9 (Wide)
Set if you have a widescreen TV.
16:9 (Compressed)
Set if you have a widescreen TV. 4:3 material is shown with
black bars on either side of the screen.
2
Component Out
(See also Connecting
using the component
video output
on
page 35
.)
Interlace
Set if your TV is not compatible with progressive scan video.
Progressive
Set if your TV is compatible with progressive scan video (see
your TV’s instruction manual for details). Press
ENTER once
more to confirm (or
RETURN to cancel).
Note that progressive scan video is only output from the
component video jacks.
HTZ170_171_270_272_En.book 29 ページ 2008年2月28日 木曜日 午後1時24分