PVI Industries 2500N400A-TPO - Manual

Recoveries based on 83% thermal efficiency. ASHRAE 90.1 compliant for efficiency and standby loss.
"J" dimension is for the burner housing only.
4" x 42" Channel skids for inputs ≤ 1000 MBtu/h.
4" x 53" Channel skids for inputs > 1000 MBtu/h.
Dimensions are in inches unless otherwise specified.
For standard and optional equipment, see form PV 6004.
Model
Number
Recovery gph
Input
Btu/h
Dimensions (inches)
Blower
Motor
Shipping
Weight
lbs 40°- 120°F 40°- 140°F A B J HP
Volt/Ph/
Amps
250 N 400A-TPO 250 200 199,000 29 4 17 1/3 115/1 ∅/8 1700
500 N 400A-TPO 500 400 399,000 29 5 17 1/2 115/1 ∅/10 1720
750 N 400A-TPO 750 600 600,000 32 6 17 1/2 115/1 ∅/10 1800
1000 N 400A-TPO 1000 800 800,000 32 8 17 1/2 115/1 ∅/10 1840
1250 N 400A-TPO 1250 1000 1,000,000 49 8 17 1/2 115/1 ∅/10 2080
1500 N 400A-TPO 1500 1200 1,200,000 49 8 17 1/2 115/1 ∅/10 2090
Gph
#2 Oil
1.4
2.8
4.3
5.7
7.2
8.6
2000 N 400A-TPO 2000 1600 1,600,000 11.4 61 10 25 1-1/2 115/1 ∅/20 2530
2500 N 400A-TPO 2500 2000 2,000,000 14.3 61 10 25 1-1/2 115/1 ∅/20 2550
3000 N 400A-TPO 3000 2400 2,400,000 17.1 60 12 25 1-1/2 115/1 ∅/20 2560
3500 N 400A-TPO 3500 2800 2,800,000 20.0 60 12 25 5 230/3 ∅/16 2590
4000 N 400A-TPO 4000 3200 3,200,000 22.8 60 12 25 5 230/3 ∅/16 2640
K
39
39
39
39
39
39
39
39
50
50
50
TURBOPOWER ® OIL PACKAGED WATER HEATER
NICKELSHIELD
®
NICKEL-PLATED STORAGE TANK
TANK SERIES 400 GALLONS
PV 5420 04/05
PVI INDUSTRIES, LLC
FORT WORTH, TEXAS 76111
(800) 784-8326 (817) 335-9531 www.pvi.com
Product is patented in the U.S., Canada, and Mexico.
VENTING REQUIREMENTS
-.02" TO -.06" W.C. (NEGATIVE PRESSURE)
ENTIRE VENT SYSTEM SHOULD NEVER BE SIZED BASED
UPON THE VENT CONNECTION DIAMETER EXCLUSIVELY.
FOR PROPER SIZING, CONSULT VENTING SUPPLIER.
STANDARD ELECTRICAL REQUIREMENTS
CONTROL VOLTAGE: 120V, 1Ø, 60 HZ., 2 AMPS.
MOTOR VOLTAGE:
208V, 230V, AND 460V MOTORS ARE AVAILABLE BUT WILL
REQUIRE A SEPARATE 120V/2 amps CONTROL CIRCUIT OR AN
OPTIONAL CONTROL CIRCUIT TRANSFORMER.
PVI RESERVES THE RIGHT TO CHANGE THE DESIGN
AND SPECIFICATION WITHOUT NOTICE.
* REAR ACCESS MODULE
MODEL PREFIX M L STD or OPTIONAL
250-1500 23" 8" OPTIONAL
2000-2500 23" 18" STANDARD
3000-4000 30" 25" STANDARD