Panasonic KX-FP250 - Manual (Page 24)

24
Setup
Connections
RJ11C
120 V, 60 Hz
Telephone
line cord
Power cord
Handset cord
Connect to “LINE”.
Power surge
protector ( )
Line surge
protector ( )
Note:
● The warranty does not cover damage due to power line surges or lightning.
For additional equipment protection, we recommend the use of a surge protector. The following types are
available; TELESPIKE BLOK MODEL TSB (TRIPPE MFG. CO.), SPIKE BLOK MODEL SK6-0 (TRIPPE
MFG. CO.), SUPER MAX (PANAMAX) or MP1 (ITW LINX).
● When you operate this product, the power outlet should be near the product and easily accessible.
● If you wish to connect an answering machine to the unit, see page 61.
● If the following message is displayed when the unit is plugged in, the recording paper set lever is released.
Display:
Move the lever back (see step 3 on page 23).
CHECK LEVER
1 Connect the handset cord.
2 Connect the telephone line cord.
3 Connect the power cord.
● When the power is turned on for
the first time, the unit will print
some basic information.
Automatic dialing mode setting
● When the telephone line cord and the power cord are connected, the unit will automatically start to detect the
dialing mode.
Display:
Wait until one of the following messages is displayed.
— If your line has touch tone service:
— If your line has rotary pulse dial service:
● If the power cord is disconnected or a power failure occurs, the unit will detect the dialing mode again when
power is restored.
● You can change the dialing mode setting manually. See page 33.
● If you connect the power cord before connecting the telephone line cord, the following messages will be
shown alternately.
Display:
Connect the telephone line cord.
NO TEL LINE INSERT TEL LINE
LINE IS PULSE
LINE IS TONE
CHECKING LINE