Panasonic KX-FP250 - Manual (Page 46)

46
Sending Faxes
Sending a fax using the Internet
1 Open the document feeder tray.
2 Adjust the width of the document guides to the size
of the document.
3 Insert the document (up to 15 pages) FACE
DOWN until a single beep is heard and the unit
grabs the document.
Display:
4 If necessary, press repeatedly to
select the desired setting (see the bottom of
page 41).
5 Press .
6 Enter the fax number using the dial keypad,
One-Touch Dial or
.
● You can use the key (see pages
52 and 53).
7 Press .
● If the number you dialed is out of the FaxSav
network service area, the unit will show the
following messages and send the fax directly
over the telephone line.
● If “OUT OF NETWORK” is displayed when
sending a fax long distance or internationally
when using IQ-FAX, then contact FaxSav at
1-888-332-9728.
SENDING NORMAL
OUT OF NETWORK
SENT TO SERVER
SENDING P1
CONNECTING.....
TRYING IQ-FAX
START/COPY/SET
FAX=
BROADCAST
JOG DIAL
IQFAX TO WHERE?
IQ-FAX
RESOLUTION
STANDARD
FACE DOWN
START/COPY/SET
Dial keypad
IQ-FAX
Document
feeder tray
Document guides
RESOLUTION
One-Touch Dial keys
JOG DIAL
BROADCAST
If you cannot send a fax
Contact FaxSav at 1-888-332-9728.
The FaxSav customer service center may send
you a program update. While receiving this
update, you will not be able to operate the unit
and the following message will be displayed for
about 3 minutes. During this time, you also will
not be able to operate extension telephones, if
they are connected.
Display:
If a loading error occurs, the unit will display the
following message.
In this case, contact FaxSav at 1-888-332-9728.
LOADING ERROR
LOADING IQ-DATA